The Professional Monitor Company (PMC) has made some enormous leaps and strides since its conception in the 90’s. Today, we will be reviewing the Result6, designed to be a more recent entry-level option from PMC. Let’s get into it.
Final verdict
The Result6 monitors are a wonderful choice in terms of sound quality and performance. The bass is tight, the sweet spot is wide, the midrange is transparent, and the stereo imaging is beautiful.
PMC has also implemented some innovative features in the monitor’s design to aid the process of dispersion and edge diffraction. Ultimately, if your budget allows, I can happily recommend these monitors.
What I like
- Neutral voicing.
- Accurate bass.
- Wide sweet spot and balanced imaging.
- User-friendly.
What I don’t like
- Nothing to note.
Why you should trust this review
As a producer and audio engineer for over 15 years, I’ve laid fingerprints on a wide range of gear in all sorts of setups.
I’ve learned how to stretch a budget, working with everything from second-hand monitors from a buddy to cheap pawn shop desktop speakers.
I’ve mixed on consumer-grade models, repurposed radio speakers, high-end studio monitors, and everything in between.
This hands-on experience, along with years of problem-solving in different recording environments, has taught me what monitors are worth investing in – and which aren’t.
Power and frequency response 5.0
The PMC Result6 monitors are bi-amped and powered with an overall output of 165 watts. The LF driver is 6.5 inches, while the HF driver is only 1 inch. These monitors are also noted as having a max peak SPL at 112 dB (1 m), so no need to worry if they’ll be loud enough.
The frequency response here goes from 45 Hz to 22 kHz, and to my ears, the total balance is phenomenal. They sound incredibly open, the imaging is solid, and the low end is tight. The mid range is remarkably transparent as well, which makes it very easy to notice small details in a mix.
As I moved around the studio, I also found that the sweet spot here is a lot wider than I was expecting it to be. The stereo image stays well intact even when you’re positioned off-axis.
I/O and controls 5.0
As far as inputs and outputs are concerned, the PMC Result6 monitors are incredibly straightforward.
There’s a single XLR input for feeding audio, and then there is an input trim knob for adjusting the sensitivity within a range of -10 dB to +10 dB. Lastly, there’s an ICE power socket and an On/Off switch. Simple.
Build quality 5.0
I haven’t much to say about the build here. The enclosure has been fabricated out of Medite Sound Damped Composite material, which has been chosen to help reduce any issues with resonance or unwanted vibrations.
The tweeter features D-Fins on its sides, which are meant to help reduce edge diffraction and enhance the dispersion of high-end information. There are decoupling bands on the cabinet, which provide additional help in this process.
Overall, these are well-designed monitors. I appreciate the thought and care that went into their performance.
Compared to other studio monitors
At $3,000 a pair, the Result6 are easily some of the best speakers for professional monitoring to get around this price range. But here are a few alternatives to consider.
Result6 vs Genelec 8340A
What can I say? Genelecs are Genelecs. In my experience, I find myself preferring the Genelec’s performance over most anything, however, they are a bit more expensive.
So if your budget has $300 worth of wiggle room, I would happily recommend the 8340A SAMs, but you ultimately can’t really go wrong with either choice.
Result6 vs Focal Solo6
The Focals are good but I would honestly go for the PMCs. The imaging is better, and I find the midrange to be more transparent. Although, the Focals do offer more control over the performance with a few shelving and EQ knobs on the rear panel.
Trust your gut on this one, they’re both solid options.
Who are the PMC Result6 monitors best suited for?
The Result6 monitors are best suited for professional audio engineers looking for a pro-grade monitoring system. If you have $3,300 to throw down on these bad boys, why don’t you just go out and do it?
See current price at: SweetwaterVideo demo
You can also watch this video by my colleague Fabio where he puts the PMC Result6 studio monitors to the test.
Thank you so much excellent review!!!
May i ask, for only casual nearfield listening you prefer Genelec 8340?
I am between PMC, Genelec 8340 and Neumann kh-150.
Thank you!!!!!
Hi! For casual listening, I would probably rec the Gens or the Neumanns over the PMCs, but that’s more of a preference thing. My hunch is that the Neumanns might be better than the Genelecs for this because Genelecs often give off a “crispness” that can be mistaken for accuracy, although that might be subjective. The best case scenario would be if you went somewhere in person and tested them side by side to see what you prefer. Even better than that would be if the dealer would allow you to take them home, test them out in the space, and then return them after a week. Depends on the situation but that’s what I would do personally. If you can’t/aren’t willing to put in the effort, I’d just say to flip a coin over the Gens and Neumanns and if you’re saddened by which side the coin lands on, then you’ll know what you actually want. Either way, you’ll wind up with a great set of monitors.
Thank you so much Brandon!!!!